건스 모디파이에서 출시한 아웃 바렐 스테빌라이져입니다.

인너 바렐에 장착 아웃 바렐과 일정한 간격을 유지해서 집탄을 좋게 하는 파트로, 특히나 메탈 컨버젼 키트에 세팅하면 좋습니다.

Today we are going to review the new “Barrel Stabilizer for GBB pistol” .

It’s a simple stuff , but will make a big improve .

First of all it made with stainless steel spring material .

During install , we can hand fit the diameter to make it hold the inner barrel tight .

And adjust the angle to increase the pressure to the outer barrel .

Please remind the direction .

Adjust the position to keep the stabilizer will work all the time .

Natural Position – don’t see the stabilizer .

If you see the stabilizer in any time , it’s not right . Just like below .

Let’s see why we need the stabilizer .

Because when the slide goes back to the natural position .The front of slide will friction the bottom of the outer barrel ，and goes forward with the barrel . But as we know , if the barrel goes forward in the wrong time , it will rise too early and against the slide . 

The friction between slide and barrel just like a hand pulling the barrel forward , and cause the barrel rise in wrong time . And against the slide . 

That’s why when we seen the malfunction happen，just push the barrel and the slide will go back to right place .

This malfunction happen easily when you change to a metal slide and barrel , especially the steel or stainless steel outer barrel . Because it’s more heavy than aluminum barrel and cause more friction between the barrel and slide .

Our stabilizer will not reduce the friction , but it keeps the barrel down and as less as the friction between the chamber and slide . When the friction cause the pull is less than the stabilizer pressure . The barrel stay low and wait for the slide to push it forward in right time . Marui found this problem , and use the same theory to handle their new products in a different way .