전체상품목록 바로가기

본문 바로가기



상품조르기 대량구매문의
품절

Gate TITAN Advanced drop-in AEG MOSFET Complete Set - Rear Wired 'GRE2' (해외배송 가능상품)

기본 정보
상품명 Gate TITAN Advanced drop-in AEG MOSFET Complete Set - Rear Wired 'GRE2'
제조사 GATE
원산지 EU(폴란드)
소비자가 209,000원
판매가 209,000원
상품코드 P0000CQU
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
Gate TITAN Advanced drop-in AEG MOSFET Complete Set - Rear Wired 'GRE2' 수량증가 수량감소 (  0)
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록

이벤트

CUSTOMER CENTER




전동건용 회로 시스템을 주력으로 출시하던 GATE 사에서 새롭게 출시한 전동건


용 2형식 전자 회로 시스템입니다.


기존 제품과 차별화된 가장 큰 장점이라면 시스테마 PTW 방식과 같은 고정밀의


광센서를 세팅, 보다 정확하고 세밀한 작동 퍼포먼스를 보여 주는 것입니다.

 

전동건용 회로 시스템을 주력으로 출시하던 GATE 사에서 새롭게 출시한 전동건용


2형식 전자 회로 시스템입니다.


기존 제품과 차별화된 가장 큰 장점이라면 시스테마 PTW 방식과 같은 고정밀의


광센서를 세팅, 보다 정확하고 세밀한 작동 퍼포먼스를 보여 주는 것입니다.



 

- 연비, 프로그램이 개선된 신형입니다.


- 20개 이상의 기능으로 다양한 세팅이 가능한 진일보한 회로 시스템 


- 장착 공임은 별도입니다.


- VFC 2형식 전동건 모델을 포함한 마루이 2형식, 클론 기어박스에 세팅이 가능합니다.


- Programming Card & USB- Link 가 추가된 컴플리트 키트입니다.





TITAN gives you the option to adjust:

  • Trigger sensitivity
  • Pre-cocking boost
  • Fire selector mode
  • Burst mode
  • Rate of fire
  • Low battery warning
  • Battery protection
  • Sniper delay


  • ensors!


  • Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.
  • It is protected against short-circuits, overheating and overloading
  • It protects the battery against over-discharge
  • It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)
  • It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)


  • It has a user-friendly configuration via the Tactical Programming Card and/or GATE Control Station
  • It has option to make firmware updates via the internet
  • It has innovative optical sensors instead of mechanical switches that can be prone to faults
  • It replicates a trigger response like in a real gun
  • It replaces the cut-off lever
  • It is compatible with DSG and SSG gears
  • It is compatible with most v2 gearboxes (including cnc) on the market without any modification











  •  


    TITAN™ (drop-in mosfet


    Get ready for the amazing functions such as:

    TRIGGER SENSITIVITY ADJUSTMENT

    Five trigger sensors allow you to control trigger sensitivity. You do not have to disassemble your AEG. Just use the Tactical Programming Card or the GATE Control Station™ App to adjust the trigger to your preferences and level of skills. 


    CONFIGURABLE FIRE SELECTOR (gen.2)

    Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode:

    • SAFE-SEMI-AUTO
    • SAFE-SEMI-SEMI
    • SAFE-SEMI-BURST
    • SAFE-BURST-AUTO
    • SAFE-SEMI-BURST/AUTO (short press - BURST, long press - AUTO)
    • SEMI-BURST-AUTO (SAFE mode via the fast switch SAFE-SEMI-SAFE)

    CYCLE DETECTION

    Thanks to the gear sensor, TITAN precisely detects in which position the cycle should finish. Therefore, even the shortest trigger action produces at least one full cycle.

    Thanks to the cycle detection function you get:

    • Automatic BURST – there is no need to set the burst time. You can set the burst between two and 10 shots;
    • Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually. You can simply set the pre-cocking as high, mid or low;
    • FULL CYCLE - when the pre-cocking is off, TITAN ensures that the gearbox completes a full cycle. You gain a higher reliability.

    PRE-COCKING (gen.2*)

    Victory in the game is often a matter of fractions of seconds. Thanks to PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly.

    1. AUTO MODE – the spring is automatically compressed after each shot,
    2. SMART MODE – slow trigger action compresses the spring, and fast trigger action fires the shot.

    And three PRE-COCKING BOOST options: HIGH / MID / LOW


    *Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually

    Please note: using PRE-COCKING increases wear and tear on the gearbox.


    BURST (gen.2*)

    The burst enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps.


    * There is no need to set burst time. You can easily set burst between two and 10 shots.


    ROF CONTROL

    This enables a reduction in a gun's rate of fire. You use stronger LiPo batteries, and still have a ROF just like in a real gun.


    ROF STAB

    It allows you to change the way the ROF Control works:
    ON - ROF Control uses PWM to decrease ROF. Thanks to this gearbox works smoothly what decreases wear and tear of AEG internal parts.
    OFF - ROF Control adds breaks between shots to decrease ROF. It gives you more realistic experience.


    SNIPER DELAY

    It lets you to set delay between each SEMI shots to simulate the delay from reload or recoil. You can set 0.5s, 1s, 2s or 3s delay.


    SMART TRIGGER

    We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control System. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full ROF, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery.

    *Works only when ROF STAB is ON.


    AUG MODE

    Enjoy two stage trigger. Activate AUG Mode and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST or AUTO fire (depending on the fire selector mode).


    BATTERY PROTECTION (gen.2*)

    Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing.


    *TITAN detects the number of cells automatically. There is no need to reprogram TITAN every time you replace the battery.


    LOW BATTERY WARNING

    When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals.  


    SMART FUSE

    We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage.


    ADAPTIVE ACTIVE BRAKE

    It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor.


    MOSFET

    Do you want to achieve a higher ROF and faster trigger response? Are you planning a power upgrade of your gun? In that case, you need a MOSFET.

    It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher ROF of the gun and a faster trigger response.


    BUILT-IN SELF-TEST

    This allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.


    COATING

    Thanks to its special conformal coating, our product is resistant to atmospheric conditions (Military Specification MIL-V-173C).


    DEANS-T READY

    The product has factory-fitted low-resistance deans-t connectors.


    MINI-TAMIYA ADAPTER

    Thanks to the Mini Tamiya Adapters included in the kit, you can smoothly connect the drop-in module to your original (stock) installation.


    14.8V LI-PO READY

    The drop-in module can be used with batteries up to and including 14.8V LI-PO. The minimum operating voltage is 3V and maximum is 17V.


    PRINTED QUICKSTART

    Make your adventure start more easily with a new product. The quickstart contains basic information and hints.





    상품사용후기

    상품의 사용후기를 적어주세요.

    게시물이 없습니다

    상품문의하기 모두 보기

    상품 Q&A

    상품에 대해 궁금한 점을 해결해 드립니다.

    글읽기 권한이 없습니다.

     "19세 미만의 미성년자"는 출입을 금합니다!

    성인인증 하기

    상품 Q&A
    번호 카테고리 제목 작성자 작성일 조회
    2 비밀글 타이탄은 딘스잭만 사용가능할까요? 이종혁 2019-12-03 1
    1    답변 비밀글 타이탄은 딘스잭만 사용가능할까요? 윤성학 2019-12-04 1

    상품문의하기 모두 보기

    첫 페이지

    이전 페이지

    1. 1

    다음 페이지

    마지막 페이지